Hydraulic Tote Dumper




  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Dolafs, Palletainers etc
  • Tip Heights up to 1500mm
  • Lifting Capacity - No Maximum
  • Hydraulic or Pneumatic Cylinders Complete with Hose Burst Fuses
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer

BTH/750/950/M Hydraulic Tote Dumper

This Hydraulic Tote Dumper was designed to lift and tip a standard Dolaf Bin (1200 x 1000 x 800mm High) at a height of 950mm and has a Safe Working Load of 750Kgs. The Hydraulic Tote Dumper is constructed from Grade 304 stainless steel, is a TIG welded construction throughout and would be mobile on two fixed and two swivel braked castors. This Hydraulic Tote Dumper was powered via a hydraulic powerpack and tipped the containers by the extension of a pair of stainless steel hydraulic cylinder to an angle of 10 degrees past the horizontal. The hydraulic cylinder is fitted with a safety check valve such that even in the unlikely event of a hydraulic hose failure, the raised bin will not fall to the floor.

Hydraulic Tote Dumper Electrical Control

This Hydraulic Tote Dumper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main frame at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The unguarded Hydraulic Tote Dumper operates on a ‘hold to run’ principle such that the ‘Up’ or ‘Down’ pushbuttons must be held for the Hydraulic Tote Dumper to operate. As soon as either button is released, the Hydraulic Tote Dumper will stop. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Description Hydraulic Tote Dumper
Model No. BTH/750/950/M
Lifting Capacity 750 Kgs
Tipping Height 950mm
Tipping Angle 100 Degrees
Machine Handing Left Hand
Tipping Chute Yes, Fitted To Lift Carriage
Container Description 750 Litre Dolaf Bin
Base Arrangement Mobile On Castors
Powerpack 1.5kW, 415V, 3 PHASE, 50 CYCLE
Control Circuit 24Vac
Electrical Rating IP65
Application Story

You May Also Be interested In...

Customer image
Pneumatic Bin Washer
Customer image
Hydraulic Box Tipper
Customer image
Hydraulic Drum Tipper
Customer image
Dolaf Bin Tipper
Customer image
Guarded Bin Tipper
Customer image
Mixing Bowl Tipper
Customer image
Hydraulic Crate Tipper
Customer image
Hydraulic Tote Dumper
Customer image
Hydraulic Tote Bin Lift
Customer image
Hydraulic Tipper
Customer image
Pneumatic Bin Tipper
Customer image
Hydraulic Bin Tipper
Customer image
Pneumatic Bin Wash Tipper