Column Bin Hoist

BTM/250/1850/B/SL

BTM/250/1850/B/SL

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Trays etc
  • Tip Heights up to 2500mm
  • Lifting Capacity up to 600Kgs
  • Chain or Screw Driven Complete with Unique Safety Latch
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/250/1850/B/SL Single Column Bin Hoist

This Single Column Bin Hoist is a 200 Litre tote bin tipper with a side loading lift carriage that is designed to lift and tip at a discharge height of 1850mm. The Column Bin Hoist is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. The unguarded Column Bin Hoist is fitted with our unique safety latch which engages automatically in the extremely unlikely event of a lift chain failure.

Column Bin Hoist Electrical Control

This Column Bin Hoist is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site. The unguarded Column Bin Hoist operates on a ‘hold to run’ principle such that the ‘Up’ or ‘Down’ pushbuttons must be held for the Column Bin Hoist to operate. As soon as either button is released, the Column Bin Hoist will stop. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Specification
Description Single Column Bin Hoist
Model No. BTM/250/1850/B/SL
Capacity 250Kgs
Tipping Height 1850mm
Tipping Angle 130 Degrees
Overall Height 2922mm
Machine Handing Right Hand Side Loading
Maximum Headroom In Excess Of 3000mm
Tipping Chute Yes, On Two Sides Of The Lift Carriage
Container Description 200 Litre Tote Bin
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Motor Detail 0.55kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail SEW Eurodrive
Output R.P.M 28 R.P.M.
Ratio 50:1
Load/Lift/Tension Chain ¾" Simplex
Tensile Strength 3000 Kgs
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
Mobile Drum Tipper
BTM/100/1200/M
Customer image
Drum Tipper
BTM/250/1600/M
Customer image
Mobile Drum Tipper
BTM/250/1200/M
Customer image
Fixed Bin Tipper
BTM/350/1250/B
Customer image
Mobile Bin Tipper
BTM/250/1100/M
Customer image
Drum Hoist
BTM/250/1275/M
Customer image
Pharmaceutical Drum Tipper
BTM/75/1650/B
Customer image
Bin Hoist
BTM/250/2260/B
Customer image
Tote Bin Tipper
BTM/250/1400-2800/M
Customer image
Column Bin Hoist
BTM/250/1850/B/SL
Customer image
Static Box Tipper
BTM/100/1500/B
Customer image
Stainless Steel Bin Tipper
BTM/200/1800/B
Customer image
Eurobin Lift
BTM/300/2100/B
Customer image
Waste Tipper
BTM/200/3200/B
Customer image
Mobile Bin Hoist
BTM/300/1850/M
Customer image
Dump Buggie Tipper
BTM/300/1400-2300/M/ADJ
Customer image
Single Pillar Tipper
BTM/300/1800/B
Customer image
300 Litre Tote Bin Tipper
BTM/300/2000/B
Customer image
Drum Lift
BTM/250/1950-2350/B
Customer image
Eurobin Tipper
BTM/300/1400/M
Customer image
Mixing Bowl Tipper
BTM/250/1525/M
Customer image
Mobile Bowl Tipper
BTM/250/1500/M
Customer image
Trolley Tipper
BTM/300/2200/B
Customer image
Hobart Mixing Bowl Tipper
BTM/150/1000/M