BTM/2P/400/4200/B/G Double Pillar 770 Litre Wheelie Bin Tipper
This Double Pillar 770 Litre Wheelie Bin Tipper is designed to lift and tip either a single 770 Litre Wheelie Bin or 2 off 240 Litre Wheelie Bins at a discharge height of 4200mm. The 770 Litre Wheelie Bin Tipper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column.
Safety Guard to BS EN 14120:2015 Safety of Machinery Guards
The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 3mm wire, 40mm aperture stainless steel weld mesh to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. It encloses the 770 Litre Wheelie Bin Tipper to a height of 2200mm on three sides, with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the 770 Litre Wheelie Bin Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.
770 Litre Wheelie Bin Tipper Electrical Control
This 770 Litre Wheelie Bin Tipper is fitted with an IP65 Stainless Steel Terminal Box and all components will be wired down to this as follows:-
- Magnetic Safety Guard Door Switch
- Interlocked Safety Guard Door Switch
- Upper Limit Switches x 2 off
- Lower Limit Switches x 2 off
- Motor Gearbox and Brake
- Push Button Station
The 770 Litre Wheelie Bin Tipper tipper control was integrated into the main control system.