Stainless Steel Pallet Lift




  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Goods Lifts for Pallets, Bins, Drums etc
  • Lift Heights – No Maximum
  • Lifting Capacity - No Maximum
  • Chain Drive
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer

PLM/2P/1000/4210/B/G Double Pillar Stainless Steel Pallet Lift

This Stainless Steel Pallet Lift has a Safe Working Load of 1000 Kgs and a lift height of 4210mm. The Stainless Steel Pallet Lift is designed to lift a Pallet of sacks to an upper level where there is a barrier over which the layers of sacks are unloaded by hand. The lifting platform is big enough to allow a standard pallet (1200 x 1000mm) to be loaded using a fork lift truck. The Stainless Steel Pallet Lift was manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor without the need for a pit. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one column with a crossover shaft to the other column.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

This Stainless Steel Pallet Lift was supplied complete with a safety guard to meet the guidelines of PD 5304 Safety of Machinery. The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet. The guard reached to a height of 1000mm above the upper floor level. At the lower level there are a pair of hinged doors through which the Stainless Steel Pallet Lift can be loaded and unloaded. Each door is electrically interlocked to prevent the machine being operated with a door open and in addition, the doors are mechanically locked closed whilst the machine is running. Each door may only be opened when the lifting carriage is at the full down position.

Stainless Steel Pallet Lift Electrical Control

This Stainless Steel Pallet Lift is fitted with an IP65 Stainless Steel Control Panel which is mounted on the safety guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop, Cleaning Key Switch and a Reset Facility.

There was a remote Stainless Steel push button station at the upper level incorporating the following controls; Up, Down, Guard Release and Emergency Stop. The remote push button station allows the Stainless Steel Pallet Lift to be inched up so that the each layer of sacks can be unloaded. Dual Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

Stainless Steel Pallet Lift Safe Access System

This Safe Access System was fitted to the Stainless Steel Pallet Lift during manufacture to allow access to the inside of the safety guard at the lower level for maintenance and housekeeping. The Access System will operate as follows:-

  • The lift frame must be empty, at the full up position and the safety guard gate must be closed
  • At the full up position, the lift carriage is prevented from moving by a 50mm support bar driven out beneath the lift carriage using an electrical actuator
  • As the bar is engaged, it will alter the state of 2 off separate safety limit switches
  • The one switch will disable the Stainless Steel Pallet Lift safety circuit and relay
  • The second limit switch will allow the lower safety guard door to be opened providing that the Safe Access Key Switch has been operated
  • It is now safe to enter the lift enclosure with the Stainless Steel Pallet Lift disabled and the lift carriage supported
  • To re-instate the Pallet Lift operation, the above sequence is reversed
Description 1000 Kgs Stainless Steel Pallet Lift
Model No. PLM/2P/1000/4210/B/G
Capacity 1000 Kgs
Lift Height 4210mm
Overall Height 6668mm
Platform Size 1400mm x 1400mm
Machine Handing Left Hand
Maximum Headroom > 7000mm
Container Description 1200 x 1000mm Pallet
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Motor Detail 2.2kW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE
Gearbox Detail SEW Eurodrive
Lift Chain 1" Simplex
Tensile Strength 6000 Kgs, 3000 Kgs
Tension Chain ¾” Simplex
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
Platform Lift
Customer image
Pallet Lift
Customer image
Goods Lift
Customer image
Goods Elevator
Customer image
Guarded Goods Lift
Customer image
Trolley Lift
Customer image
Mezzanine Floor Lift
Customer image
Guarded Platform Lift
Customer image
Twin Pallet Lift
Customer image
Euro Pallet Lift
Customer image
Between Floor Lift
Customer image
Guarded Pallet Lift
Customer image
Warehouse Lift
Customer image
Heavy Duty Pallet Lift
Customer image
Food Standard Pallet Lift
Customer image
ATEX Drum Elevator
Customer image
Tote Bin Platform Lift
Customer image
Mezzanine Floor Lift
Customer image
ATEX Platform Lift
Customer image
Stainless Steel Goods Lift
Customer image
Stainless Steel Platform lift
Customer image
Stainless Steel Pallet Lift
Customer image
Eurobin Platform Lift
Customer image
IBC Platform Lift
Customer image
Dolav Platform Lift