Tote Dumper High Level




  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Trays etc
  • Tip Heights up to Customers’ Requirements
  • Lifting Capacity up to 600Kgs
  • Chain or Screw Drive
  • Fully Enclosed Safety Guard
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer

Single Pillar Tote Dumper High Level

This single pillar Tote Dumper High Level is designed to lift and tip at a Special purpose Tote weighing up to 100 Kgs at a discharge height of 5200mm. The Tote Dumper High Level is constructed from grade 304 stainless steel and is fully Tig welded throughout. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. The Tote Dumper High Level is designed to be bolted to the floor and is braced near the top.

Safety Guard to PD 5304:2005 Safety of Machinery

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2mm stainless steel sheet to meet the requirements of pD 5304:2005 Safety of machinery. it would enclose the Tote Dumper High Level to a height of 2200mm on all sides with a vertically opening gate through which the tote is loaded. The guard door is electrically and mechanically interlocked preventing the Tote Dumper High Level from operating with the door open. in addition, the guard door can only be opened when the lifting carriage is at the full down position. The Tote Dumper High Level control system has provision for a ‘call for product’ signal to be connected.

Tote Dumper High Level Application Story

The Tote Dumper High Level was designed to tip pet food into a mixing and packing Line at high level.

Description Single Pillar Tote Dumper High Level
Model No. BTM/100/5850/B/G
Capacity 100 Kgs
Tipping Height 5850mm
Tipping Angle 130 Degrees
Overall Height 6800mm
Machine Handing Left or Right Hand Available
Tipping Chute Optional
Container Description Special Purpose Tote
Base Arrangement Bolted To The Floor & Braced
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Adjustable Rod
Motor Detail 0.55kW, 415V, 3 PHASE, 50 CYCLE
Motor Brake 415V Separately Excited
Gearbox Detail SEW
Output R.P.M 28 R.P.M.
Ratio 50:1
Load/Lift/Tension Chain ¾” Simplex Delta Z
Tensile Strength 3000 Kgs
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
300 Litre Bin Tipper
Customer image
Tote Bin Hoist
Customer image
Single Pillar Hoist
Customer image
Single Pillar Lifter
Customer image
Tray Tipper
Customer image
Column Lifter Guarded
Customer image
Guarded Trolley Tipper
Customer image
ATEX Bin Tipper
Customer image
Guarded Drum Tipper
Customer image
Guarded Bin Tipper
Customer image
Guarded Dump Buggie Tipper
Customer image
High Level Bin Tipper
Customer image
Salad Bin Tipper
Customer image
Tote Dumper High Level
Customer image
Stillage Tipper
Customer image
Guarded Tote Bin Tipper
Customer image
200 Litre Tote Bin Tipper
Customer image
Dump Buggy Tipper
Customer image
Dough Tipper