Salad Bin Tipper

BTM/250/1200/B/G

BTM/250/1200/B/G

Features

  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Trays etc
  • Tip Heights up to 2500mm
  • Lifting Capacity up to 600Kgs
  • Chain or Screw Drive
  • Fully Enclosed Safety Guard
  • Fully Load Tested and CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer
Description

BTM/250/1200/B/G Single Pillar Salad Bin Tipper

This Single Pillar Salad Bin Tipper is designed to lift and tip at a discharge height of 1200mm. The Salad Bin Tipper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

This Salad Bin Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard was constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet. It encloses the Salad Bin Tipper to a height of 2200mm on two sides, 1000mm at the tipping side with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Salad Bin Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Salad Bin Tipper Electrical Control

This Salad Bin Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. The Salad Bin Tipper operation is on a hold to run basis so that holding the ‘Up’ push button will raise the lift to the full tip position. Once the product has been discharged, holding the ‘Down’ push button will return the Salad Bin Tipper to the full down position. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Specification
Description Single Pillar Salad Bin Tipper
Model No. BTM/250/1200/B/G
Capacity 250Kgs
Tipping Height 1200mm
Tipping Angle 135 Degrees
Overall Height 2555mm
Machine Handing Right Hand
Maximum Headroom 3000mm
Tipping Chute No
Container Description Stainless Steel Salad Bin
Base Arrangement Bolted To The Floor
Control Circuit 24Vac
Electrical Rating IP65
Limit Switches Telemecanique
Motor Detail 0.75kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail SEW Eurodrive
Output R.P.M 28 R.P.M.
Ratio 50:1
Load/Lift/Tension Chain ¾" Simplex
Tensile Strength 3000 Kgs
Lift Speed 6.4 Meters/Minute
Application Story

You May Also Be interested In...

Customer image
300 Litre Bin Tipper
BTM/350/2850/B/G
Customer image
Tote Bin Hoist
BTM/300/2400/B/G
Customer image
Single Pillar Hoist
BTM/300/3800/B/G
Customer image
Single Pillar Lifter
BTM/350/2635/B/G
Customer image
Tray Tipper
BTM/350/1600/M/G
Customer image
Column Lifter Guarded
BTM/250/3700/B/G
Customer image
Guarded Trolley Tipper
BTM/250/2200/B/G/SL
Customer image
ATEX Bin Tipper
BTM/300/2500/M
Customer image
Guarded Drum Tipper
BTM/300/1900/B/G/140
Customer image
Guarded Bin Tipper
BTM/300/4450/B/G
Customer image
Guarded Dump Buggie Tipper
BTM/300/1854/M/G
Customer image
High Level Bin Tipper
BTM/350/4650/B/G
Customer image
Salad Bin Tipper
BTM/250/1200/B/G
Customer image
Tote Dumper High Level
BTM/100/5850/B/G
Customer image
Stillage Tipper
BTM/400/1850/B/G
Customer image
Guarded Tote Bin Tipper
BTM/300/1600/B/G