Hydraulic Tote Bin Lift




  • Stainless Steel or Mild Steel Construction
  • Food/Pharmaceutical Industry Specification
  • Standard and Custom Design Machines
  • Fully TIG/MIG Welded Construction
  • Lifts for Bins, Drums, Dolafs, Palletainers etc
  • Tip Heights up to 1500mm
  • Lifting Capacity - No Maximum
  • Hydraulic or Pneumatic Cylinders Complete with Hose Burst Fuses
  • Fully Enclosed Safety Guard Option
  • Fully Load Tested and UKCA or CE Certified
  • LOLER Inspection and After Sales Service Available
  • Direct from a British Manufacturer

BTH/300/1000/M Hydraulic Tote Bin Lift

This Hydraulic Tote Bin Lift was designed to lift and tip a standard 200 or 300 Litre Eurobin at a height of 1000mm and had a Safe Working Load of 300 Kgs. The Hydraulic Tote Bin Lift is constructed from Grade 304 stainless steel, is a TIG welded construction throughout and would be mobile on castors. This Hydraulic Tote Bin Lift was powered via a hydraulic powerpack and tipped the container by the extension of a stainless steel hydraulic cylinder to an angle of 30 degrees past the horizontal. The hydraulic cylinder is fitted with a safety check valve such that even in the unlikely event of a hydraulic hose failure, the raised bin will not fall to the floor.

Hydraulic Tote Bin Lift Electrical Control

This Hydraulic Tote Bin Lift was fitted with an IP65 Stainless Steel Control Panel mounted on the main frame at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The unguarded Hydraulic Tote Bin Lift operates on a ‘hold to run’ principle such that the ‘Up’ or ‘Down’ pushbuttons must be held for the Hydraulic Tote Bin Lift to operate. As soon as either button is released, the Hydraulic Tote Bin Lift will stop. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Description Hydraulic Tote Bin Lift
Model No. BTH/300/1000/M
Lifting Capacity 300 Kgs
Tipping Height 1000mm
Tipping Angle 120 Degrees
Machine Handing Right Hand
Tipping Chute Yes, Fitted To Lift Carriage
Container Description 200 & 300 Litre Tote Bin
Base Arrangement Mobile On Castors With Brackets
Powerpack 0.55kW, 480V, 3 PHASE, 60 CYCLE
Control Circuit 24Vac
Electrical Rating IP65
Application Story

You May Also Be interested In...

Customer image
Pneumatic Bin Washer
Customer image
Hydraulic Box Tipper
Customer image
Hydraulic Drum Tipper
Customer image
Dolaf Bin Tipper
Customer image
Guarded Bin Tipper
Customer image
Mixing Bowl Tipper
Customer image
Hydraulic Crate Tipper
Customer image
Hydraulic Tote Dumper
Customer image
Hydraulic Tote Bin Lift
Customer image
Hydraulic Tipper
Customer image
Pneumatic Bin Tipper
Customer image
Hydraulic Bin Tipper
Customer image
Pneumatic Bin Wash Tipper
Customer image
Hydraulic Dolav Bin Tipper
Customer image
Hydraulic Trough Tipper
Customer image
Bin Wash Tipper
Customer image
Battery Operated Dump Buggy Tipper
Customer image
Bakery Bowl Lift
Customer image
Dolav Box Tipper
Customer image
Diosna Mixing Bowl Lift